Grouts

DURAL 452 LV-IN

DURAL 452 LV - IN is a two-component,100% solids, moisture insensitive, high strength epoxy adhesive and
binder for numerous applications.

E3-G-IN

E3-G-IN is a high strength epoxy grout designed for grouting machine and equipment bases of all types. Formulated to be used in both thin and thick sections, E3-G-IN is suitable for grouting bases of numerous configurations. This formula gives excellent strengths and resistance to many corrosive chemicals. 

EUCO GROUT UHS - IN

EUCO GROUT UHS - IN is designed for critical use where ultra high strength, non-shrink and designed to high early and ultimate strength at a flowable consistency. EUCO GROUT UHS - IN contains only natural aggregate and an expansive cementitious binder. It is extremely flowable. When cured, it appears similar to concrete in appearance. 

EUCOFIX SL / NS -IN

The two versions of Eucofix polyester resin anchor grout are all premeasured, two parts, filled polyster resin grouts. After hardening the grout produces anchorages of consistent reproducible values.

EUCOFIX SL is used where the difference between the hole diameter and bar diameter by not less than 4mm and not more than 25mm.

EUCOFIX NS is used in overhead or horizontal holes where bar / hole relationship conforms to EUCOFIX polyester resin anchor grout SL.

GROUT ADMIX-IN

Grout Admix-IN a powder additive imparts shrinkage compensation , high flowability and pumpability to the mix on mixing with cementitious system. It produces controlled expansion and minimized water demand.

NS GROUT

NS GROUT is designed for critical use where high strength, non-staining characteristics and positive expansion are required. NS GROUT contains only natural aggregate and an expansive cementitious binder. It is extremely flowable.